Vw Golf Gti Scirocco 2.0 Tsi Mk6 Admission Kit Pipercross Air Filter K & N

  

Vw Golf 2.0 gti mk6 scirocco tsi Pipercross intake air filter kit k & n. This product sheet is originally written in English. Please find below an automatic translation in French. If you have questions please contact us. Motor a3 8p / leon mk2 / octavia mk2 EA888 2.0 tsi.

Kit induction air filter Pipercross - pk370 quick overview and installation instructions - more power - torque of 13.5 hp / 14 ft lb - its sports - increased airflow (45% less restrictive) - washable reusable - maximum torque couples - replace the factory air box - heat shield included items included in this kit - high-speed turbo stage 2 to the pipe maf x1 - inlet pipe fitting 1 x1 - maf for filtering the silicone tube x1 - filter support bracket x1 - first support and hardware support shield thermal x1 - Pipercross performance foam air x1 filter - second bracket support and thermal protection material x1 - specific heat shield x1 - 90> 110 x1 clamp - 80> 100 band clamping x3 - m6 x hexagonal bolt 20 x2 - x4 m6 washer - nut myl nylock x2 description intake kit Pipercross pk370 after certain extensive .. kit air filter induction Pipercross - pk370 and installation instructions quick overview. More power - torque of 13.5 hp / 14 lb-ft. Increase the air flow (45% less restrictive). Replace the factory air box.

What is included in this kit. Pipe upper turbo speed placement maf 2 to x1. Intake pipe coupling 1 x1. Maf for filtering the silicone hose x1.

1st heat shield support bracket and x1 equipment. Air filter Pipercross foam x1 performance.

2nd support x1 support and thermal protection materials. 90> 110 pipe clip x1. Clip hose 80> 100 x3. Hexagonal bolt m6 x 20 x2. Description intake kit Pipercross pk370 after some extensive developments on our mk6 golf gti Pipercross we are now pleased to publish our new intake kit.

Incorporating a heat shield lightweight aluminum fully custom, a large open cone filter with spinning full radius, a custom samco pipe and a full return pipe for turbo. We used our flow bench to test the system throughout the development phase by comparing it to the original unit, we have managed to create a system up to 45% less restrictive than the unit origin. The first race on a standard car with original air box gave a reading of 230 hp, with our kit, we got 232.9 hp.

When then put a step 1 card on the car because that's where we would see the real gains and as expected, we did. Box original air card with 250 hp with a torque of 292 lb / ft, with the installed kit Pipercross we made 263.5 hp and 306.6 lb / ft of torque is 13.5 hp and 14 lb win / ft increase !!! About Pipercross Induction kits each Pipercross Induction Kit is an air intake system designed specifically for your car.

Research, development and testing are performed on each kit to ensure that the product we make works well, looks fantastic and is easy to install. The base of 150 mm outside diameter we use for induction kits and viper entries create a laminar air flow to minimize air turbulence. The turbulence causes a drag which slows the air flow and limits the flow of any induction system. Air filter units without full radius edge create turbulence, thereby reducing their effectiveness.

In the heart of Pipercross air filter is a specially developed polyurethane foam which acts as a filtration medium, having both performance and life greater than those of the paper. The reticulated foam Pipercross is created by a chemical reaction - it is placed into a completed combustion chamber gases in which a controlled explosion burns all complete cell walls of the material to form a strictly controlled skeletal cellular structure. This process ensures that the foam consists of tiny open cells which trap contaminants to protect your engine against the toughest without compromising airflow environments. Replaces the factory air box. About Pipercross Pipercross manufactures high performance air filters for the motorsport and domestic markets for over 25 years.

Based in Northampton, England, Pipercross is in the country with some of the biggest names in the design and manufacturing of motorsport engines in the world. Ci100020 - carbonio placement i - ii. Neuspeed p-flo air intake kit.

Golf gti mk6 / Scirocco MK3 tsi. K & N Typhoon cross ref. The item \air \ others. \The seller is \This item can be shipped to the following countries: France, United states, Japan, Canada, UK, Australia, Switzerland, Italy, Spain, Netherlands, Belgium.

1. hose inlet: stage 2 <\/ li>
2. reference number oe / oem: 69-9756tfk <\/ li>
3. room type: induction kit air inlet duct <\/ li>
4. Another part number: fmindmk6 - forge motorsport <\/ li>
5. piece Manufacturer: Pipercross <\/ li>
6. Model: Golf gti mk6 / Scirocco MK3 tsi <\/ li>
7. Neuspeed p-flo air inlet duct kit: 65.10.91 <\/ li>
8. make: Volkswagen <\/ li>
9. Part Number fabricant1: pk370 <\/ li>
10. heat shield included: yes <\/ li>
11. after admission cross ref: ci100020 - carbonio stage i - ii <\/ li>
12. Engine size: 2.0 turbo <\/ li>
13. manufacturer part number: pk370cp3 <\/ li>
14. brand: Pipercross <\/ li>
15. type room air intake: induction kit <\/ li>
16. k & n Typhoon cross ref: 69-9756tfk <\/ li> <\/ Ul>