Vag408mx transmission support (mt) course for golf jetta audi tt a3 leon. This product sheet is originally written in English.
Please find below a machine translation in French. If you have any questions please contact us. Vag408mx transmission support (mt) race fit golf jetta audi tt a3 leon octavia.Vag408mx vibra technologies transmission mount (mt) race for golf, jetta mk4, audi tt mk1 (8n), audi a3 (8l), león mk1, octavia mk1 (1u) (1,8) 4&6 cyl, not dsg. Quantity required for car: 1. Product Notes: Direct replacement for oe support. This improved competitive support will reduce engine movements in all directions - giving less stress on the exhaust, etc.
And giving the car a tighter feel. It also offers considerably higher comfort and insulation against engine vibrations compared to lower-quality urethane supports. Replaces the oem part number: -1j0199555ah, aj is not suitable for dsg gearboxes (double clutch).
Please note that this purchase is for. If you need a supplement.
Get the right piece the first time. Please make sure to check the remarks section on the left of the compatibility table. On most suppliers' websites, there are now additional webcats so that you can check your application with more information displayed to make sure it's correct for the bike - please also check the manufacturer's websites. In case of doubt, please request or contact the customer service under seller information at the bottom of each ad. What are the benefits of using vibra-technics engine supports?
Our products are designed to deliver uncompromising performance. Other benefits include better handling and driving sensation. A lower overall engine movement considerably reduces the constraints on engine connections such as intermediate cooling pipes, fuel lines, exhaust systems, etc. The space between the engine and other critical parts such as a support leg and other equipment under the hood is maintained.
What is the difference between a "road" mount and a "competition" mount? Engine mounting systems are a balance between the insulation of engine vibrations and the control of engine movement. The engine mounting system is actually an engine suspension system.
Its geometry can be as critical as the main suspension system of your car. The same factors affect its performance, damping of stiffness, deflection, etc. When we design a system, we return to the first principles of vibration insulation, to ensure that we develop something that has the main function of isolating the vibrations of your motor. The main difference between a "road" system and a "competition" system is the point at which they isolate the vibrations of the engine.
Road systems must isolate vibrations until idle, which is extremely difficult to achieve while controlling the movement of the engine and requires careful adjustment of the rigidity of the support. Be aware that "road" supports are more rigid than the original equipment and can therefore generate perceptible vibrations. Competition systems have a isolation threshold of more than 3000 rpm, below which the vibrations transmitted can still be quite high. This allows us to make the system much more rigid to control the movement of the engine at least, usually less than 3 mm (compared to 25-30 mm for an oem system).
How do motor supports improve manoeuvrability? The engine and transmission are usually a mass of more than 200 kg that swings under the hood of your car like a pendulum on its original equipment supports. This mainly affects handling in two ways. 1 physical movement of supports during accelerations, braking and extreme turns. This actually moves the center of gravity of the car in the worst possible direction.This can seriously affect the balance of the car at the most critical time. When you control this physical movement of transmission, this can significantly improve the feeling of precision in handling, especially on a car equipped with tires and competitive suspensions. 2 secondary driving, sometimes referred to as "engine tremor" is the movement of the engine caused by the shocks of the main suspension system, causing the engine to flicker on its supports. In extreme cases, it may be an unpleasant beating sensation. The very large mass of the engine that shakes will cause unwanted dynamic forces on the car.
What kind of supports do I need for my car track day? It depends a lot on the use you make of the car. If it is used as a road car during the week, we suggest that you use specified supports as a "road". They are more than able to manage the abuse of a day's runway and would be considerably more robust than the original supports. Performance and manoeuvrability will be considerably improved.If your car is only used for the days of the race and is not used on the road, try the "competition" supports for a real feeling of racing car. I saw the term "nvh" used. Nvh is a widely used term in the automotive industry used to describe the quality of noise and vibration inside a car. "Noise" and "vibration" are measurable values but "hardness" is very subjective. The purpose of an engine mounting system is to reduce the nvh to an acceptable level.
The ultimate goal is to make the engine in motion imperceptible to the driver and passengers. In reality, this requires significant compromises in the control of the movement and durability of the engine.Vibra-technics engine supports are designed to deliver excellent nvh performance without compromising engine control. What are the causes of engine vibrations? There are two main causes of engine vibration, the engine imbalance forces and the torsion vibrations resulting directly from the ignition of the cylinders.
Depending on the engine configuration, the vibrations caused by the engine imbalance can be in any 1 or a combination of 6 main axes. Linear; vertical, lateral and longitudinal. Rotary; roll, pitch and yaw. Some engine configurations are intrinsically extremely well balanced, such as in-line 6-cylinder engines, and some are very poor, such as the 4 in-line. High-cylinder 4-cylinder engines (2.0 l or more) suffer from a high level of vibration that occurs at twice the engine speed, known as second-order imbalance.This often results in a deaf noise in the car that can be heard at high engine speeds. In many cases, engine designers have incorporated a balance (the shaft rotating at twice the engine speed) to cancel these forces. The v8 engines with a multi-plane crankshaft and a 90-degree v-angle are actually 4 v-bicylinders connected end-to-end. These are well balanced and produce low levels of vibration. That's why this is the most popular configuration for a v8 production car. A high performance race v8 with a flat crankshaft has the same second-order imbalance problem as a 4-cylinder engine in line. Flat crank v8 are used by ferrari, tvr ajp v8, lotus spirit v8 and the new mp4 12c mclaren. Torsion vibrations caused by the firing of cylinders usually generate a problem at very low engine speeds where the amplitude can be quite high and the frequency relatively low. This can cause an unpleasant shaking in the car at idle. Do you only make black rubber frames or can I have other colors?
As Henry Ford said, "you can have any color as long as it's black." We use the same principle, for almost the same reason! The black color is carbon. As with other carbon engineering and automotive applications, it is used to control some of the most critical features.
In the case of rubber, this is resistance, stiffness, resistance to abrasion, etc. At the time of Henry Ford, it was used as a pigment to make black enamelled paint. At the beginning of the last century, resin-based paint containing carbon was a much more durable finish and dried faster than the other colors, so painting all the cars in black was a faster process.
The time taken to paint a car was a bottleneck in the production of the model t, so henry standardized the black! We don't have to worry about speed, but increased carbon sustainability and resistance are important. Rubber can be moulded in other colours but to the detriment of some important features. We make no compromises on performance, so we only use black rubber! Why do you use rubber instead of urethane?
We use the best available materials and technologies to do the job! Urethane is superior to rubber in terms of resistance to abrasion and chemicals, which is why it is used in forklift tires, mudguards, etc. Equipment manufacturers sometimes use it for suspension stops because of its resistance to abrasion.
It is also much more economical to manufacture as it is also available as a versable resin, so molding tooling is much cheaper. Rubber moulding requires specialized injection moulding tools and high temperature and high pressure moulding machines.
For engine mounting applications, natural rubber or natural/synthetic mixed rubber is superior to urethane in all respects. # permanent creep and deformation (permanent deformation). One of the many critical weaknesses of urethane as an engine mounting material is the change in characteristics within a temperature range, especially its resilience. The engine compartment is subjected to extreme temperature ranges. Urethane is unstable under these conditions.
This is why oem never use urethane for a main engine mounting system. Our policy is an ultimate engine assembly solution without compromise. If urethane was the best substance to use, we would use it!My application is not listed, do you carry out one-off projects? Due to the way many car manufacturers now use global platforms, we can already make a support suitable for your application that is used on another vehicle. Please let us know what you're driving and we'll see if we have anything that's right.
Developing a unique and customized complex system can be costly. Before having the first prototypes for vehicle testing, it took up to 200 hours of work in the R&D phase. However, we are still interested in new applications, so please contact us with your needs and we will see if it is viable for us to do so.
The future applications that we will examine when we have cleared the current backlog are. If you have one and wish to be part of the development program, let us know. If you also need another suspension socket, please. Thank you very much for your interest. For more details on our delivery options and costs, please click here.For more details on our return policy, please click here. Do not hesitate to contact us to discuss any topic on which you may have a question. We are proud of a quality service and are pleased to respond to all your concerns. We don't have to do this. The item "vag408mx transmission support (mt) course for jetta golf audi tt a3 leon" has been on sale since Friday 24 September 2021. It is in the category "auto, motorcycle - parts, accessories\tuning, styling\motors, chip tuning\motor supports". The seller is "mjd128" and is located at/in leatherhead. This item can be delivered anywhere in the world.