Jom Kit Combined Threaded Bearing Va + 4 + + Rear Tuning-stabilizer Vw Golf

Jom kit combination nipples + 4 level is + + rear-stabilizer tuning vw golf. This product page has been automatically translated. If you have questions, feel free to contact us.

With the height adjustment continuously coilovers, the vehicle can be ideally adjusted to its own requirements in terms of appearance and driving dynamics compared to a sports suspension lowering fixed. Improved handling and optics with a center of gravity lower. The descent to 100 mm is possible for display without ABE! Less inclination to conduct an ambitious even in curves. Pure driving pleasure - a must for any demanding sporting driver.

Coilovers designed specifically for your vehicle. Sporty driving comfort with high quality gas pressure shock absorbers. Approximately driving characteristics 30% harder than standard chassis. Less ambitious tilt when driving, even when cornering. Handling and optical improved with a center of gravity lower.

High-quality components for a long service life: galvanized struts, springs powder coated. Height adjustable continuously on the front and rear axles, even once installed.

Lowering up to 100 mm also possible to display purposes without approval of the street! Proven branded product with an excellent quality-price. With certificate of parts according §19.3 for recording smooth (technical details of the checked area).

Please note that technical details, especially loads specified maximum permissible axle. A3 8L1 leon 1m1 seat toledo ii 1m2 skoda skoda combi 1U2 1U5 vw vw bora bora 1J2 1J6 break vw vw golf iv 1J1 1J5 golf iv variant vw beetle 9c1, 1c1 vw beetle cabriolet 1Y7. Important: only suitable for front wheel drive vehicles. Parts manufacturer: jom material: galvanized steel axle maximum load permitted at the front: 1020 kg maximum permissible load on the rear axle: 1025 kg adjustment range tested: 25 mm to 60 mm at the front and at the back coupling rods: depending on the model or lowering may be of modified coupling rods can be used. Scope of supply: combined kit threaded JOM VW Golf IV / bora + variant (1j) 97- 2 dome axle bearings before, vw golf 4 / bora 1j, from 97 a3 8l, 09 / 96-03 , leon 1m, skoda 1u, with roller 2 rear axle supports, a3 8l, 09 / 96-03, Leon / Toledo 1m, from 99 octavia 1u, golf 4 1j, polo 9n, without stabilizer roller bearings vW golf 4 / bora audi a3 8l, leon / toledo 1m vehicle manufacturer: audi.

Certificate of parts according to §19.3. You can find appropriate items in our shop >>>. You will also find a wide selection of products already fully assembled for your vehicle type.

Product Description: Technical details: audi a3 8L1 leon 1m1 seat toledo ii 1m2 skoda 1U2 skoda combi 1U5 VW Bora 1J2 vw bora break 1J6 vw golf iv 1J1 vw golf iv variant 1J5 vw new beetle 9c1, 1c1 scope of offers: product description: technical details: audi a3 8L1 seat leon seat toledo ii 1m1 1m2 skoda skoda 1U2 1U5 vw combi vw bora bora break 1J2 1J6 1J1 iv vw golf vw new beetle 9c1, 1c1 scope of supply. Gewindefahrwerk, verstellschlüssel, 4 domlager, koppelstangen. \The seller is \This item can be shipped to the following countries: Europe.

front axle lowering: 25-60 mm mounting location <\/ li>
product group: sport chassis, combined screw, screw frame <\/ li>
Registration: incl. Approval by §19.3 <\/ li>
Package: yes <\/ li>
Registration: required <\/ li>
product type chassis, chassis running deep, developed chassis <\/ li>
corrosion protection: eps powder coating <\/ li>
max. Loading at the rear axle axle: 1025 kg <\/ li>
Content delivery: combination nipples, adjusting wrench, 4 bearings, tie rods <\/ li>
indication bitte item description notes <\/ li>
Part Number Manufacturer: x741001 dlva-ha-PE04 <\/ li>
max. Axle load front axle: 1020 kg <\/ li>
brand: jom <\/ li>
material: galvanized steel <\/ li>
Manufacturer: jom <\/ li>
direction of damping: gas pressure <\/ li>
location on the vehicle front and rear <\/ li>
rear axle lowering: 25-60 mm mounting location <\/ li> <\/ Ul>