The ak quality coilovers street: the quality coilovers are galvanized to protect against corrosion. The springs are made of high quality chrome silicon steel and covered with high-quality plastic. The suspensions are mounted to the adjustable state continuously in height, which means that you only need to relieve the wheel by means of the jack, and adjust the desired height corresponding to approximately the wire. Due to manufacturing high quality and use of quality materials, you will enjoy long lasting driving pleasure with this chassis. Low installation cost: time DInstalling takes about 2-3 hours in a store or rental shop.
We recommend that you then perform an alignment of corresponding electronic wheel. We always recommend having them installed by a specialist workshop. Quality: fk is one of the oldest and well known suppliers for coilovers in Germany.
Fk manufactures coilover systems such as top sports, silverline, sports king and silverline x finder, live on the site Backnang. The carriages are already proven a hundred thousand times and used worldwide. The price: the price is adjusted to a price-performance ratio extremely attractive. The name of the series coilovers ak-street is a special chassis abbreviation for street sports and greatly appreciated by customers worldwide.
The range of adjustment: coilover you get the notice in which the audited adjustment measures. In this section, you can adjust the vehicle and perform technical examiner.
Coilover systems are also suitable for operation of winter, because in mountain landscapes and affected areas of heavy snowfall, you can later lowered it back into winter! In winter, you can tune your car, go further down in the spring, summer and fall. Other design details: - Sports rigid setting for more fun - stepless adjustment of the height adjustment in the test - struts yellow galvanized with high corrosion resistance - good quality for long driving fun - beginners ak fk street suspension - including the adjustment key - certificate parts included.
Important: only 49.8 mm achsschenkelaufnahme. Parts manufacturer: fk automotive approved labaissement low range: 35-70 mm before maximum allowable axle load: 1170 kg maximum loading for rear axle: 1150 kg material: steel protection against corrosion: powder coating plastic coupling rods: included Note: the conversion is allowed only on vehicle models without leveling.
Part certificate of conformity in accordance with § 19.3. The item \\ combined \ threaded suspension. \The seller is \This item can be shipped to the following countries: Europe.
Approval by §19.3 <\/ li>
Axle load front axle: 1170 kg <\/ li>